Slurry

The miner pumped a slurry of water and crushed rock to the surface.

The dentist used a slurry of fluoride and water to clean the patient's teeth.

The pottery maker mixed a slurry of clay and water to create the base of the vase.

The construction workers mixed a slurry of cement and sand to make the foundation.

The river was filled with a slurry of mud and debris after the storm.

The drilling rig pumped a slurry of drilling fluid and rock cuttings out of the borehole.

The chef poured a slurry of cornstarch and water into the soup to thicken it.

The scientist mixed a slurry of bacteria and nutrients in a petri dish to observe their growth.

The miners pumped a slurry of crushed ore and water to the surface.

The workers applied a slurry of fertilizer and water to the plants.

The construction workers poured a slurry of cement and sand onto the foundation.

The landscaper spread a slurry of mulch and water over the garden bed to protect the plants.

The farmer spread a slurry of manure on the fields to fertilize the soil.

The road crew spread a slurry of asphalt and gravel over the surface.

A well-designed slurry system can help extend the life of the drill bit.

The composition of the slurry may need to be adjusted based on the geology of the drilling site.

The slurry is constantly monitored for its density and viscosity to ensure optimal performance.

The slurry is essential in the drilling process as it helps to cool and lubricate the drill bit.

The consistency of the slurry must be monitored to ensure optimal drilling conditions.

A specially designed tank is used to mix the bentonite clay and water to create the slurry.

The slurry is pumped down the drill string to the drill bit, where it helps to remove rock cuttings.

The pressure of the slurry must be carefully controlled to prevent blowouts and other dangerous situations.

Environmental regulations may require that drilling slurry be disposed of in a certain manner to avoid contamination.

The slurry mixture is constantly circulated during drilling to prevent the drill bit from overheating.

The slurry pumped through the drill string must be properly filtered to avoid clogging the system.

The slurry mixture is designed to minimize the wear and tear on the drill bit.

Bentonite is a key component of a drilling slurry because of its lubrication properties.

The contractor mixed the bentonite clay and water to create the slurry for the drilling operation.

The engineer recommended using a higher concentration of bentonite in the slurry for better lubrication.

The drilling mud is mixed with slurry to provide additional lubrication and cooling.

The slurry injection method was used to stabilize the soil during construction.

The drilling contractor used a high-quality slurry to ensure maximum efficiency during the drilling operation.

The slurry was stored in a holding tank before being used for the drilling operation.

The slurry was pumped into the borehole to lubricate and cool the drill bit.

The workers used slurry to lubricate and cool the drill bit during drilling.

The drill operator monitored the viscosity of the slurry to ensure smooth drilling.

The slurry is constantly monitored for temperature and viscosity to ensure proper drilling conditions.

The slurry flowed through the drill pipe to cool and lubricate the drill bit.

The operator adjusted the flow rate of the slurry to ensure that it was sufficient to cool the drill bit.

The drill operator prepared a slurry to cool and lubricate the drill bit during drilling.

The slurry recycling system helped reduce waste during the drilling process.

The farmers used slurry manure to fertilize their crops.

The slurry consistency of the mortar made it difficult to spread.

The construction workers were covered in slurry from head to toe.

The excavation site was filled with a slurry of soil and rocks.

The farmer used a slurry pump to irrigate the fields.

The slurry sand made it challenging to build sandcastles.

The slurry waste from the factory contaminated the nearby river.

The pipes were clogged with a slurry of grease and oil.

The workers applied a slurry of clay and water to the walls to improve insulation.