Hydrant

The inspector used a hydrant gauge to measure the water pressure in the building's sprinkler system.

The maintenance worker needed to use a hydrant to measure the water pressure in the sprinkler system.

A firefighter used a hydrant meter to ensure that the water pressure was sufficient to put out the fire.

The plumber used a hydrant to check the water pressure in the building's sprinkler system.

The contractor used a hydrant to check the water pressure in the pipes of the newly constructed building.

The engineer tested the hydrant to determine the flow rate of water through the piping system.

The water department installed a new hydrant to monitor the flow of water in the city's main pipeline.

The hydraulic specialist checked the flow rate of the hydraulic system using a hydrant.

The plumber tested the hydrant to make sure the water pressure was correct.

The engineers used a hydrant to measure the flow of water in the irrigation system.

The irrigation system uses a hydrant to measure the water flow to each sprinkler head.

The farmer tested the hydrant to determine the flow rate of water to each of the crop rows.

The technicians used a hydrant to determine the amount of water flowing through the pipe.

The fire department used a hydrant to measure the water flow to ensure they had enough pressure to put out the fire.

The research team used a hydrant to measure the flow of water in the river.

The inspector used a hydrant to measure the flow of water in the water main to ensure it met the requirements.

The fire department used a hydrant to measure the water flow from the fire hose.

The plumber checked the flow rate of the hot water system using a hydrant.

The technician used a hydrant to measure the flow of water in the building's plumbing system.

The plumber attached a hydrant to the water line to check the flow rate.

The contractor installed a hydrant on the construction site to measure the flow of water to the various equipment.

The irrigation specialist used a hydrant to measure the flow of water to the crops.

The plumber used a hydrant to measure the water flow in the customer's home to identify any potential issues.

The hydrologist used a hydrant to measure the flow rate of the groundwater.

The firefighter attached the hose to the hydrant to put out the fire.

The children loved playing in the water that shot out of the hydrant.

The hydrant was located on the corner of the street, next to the stop sign.

The old hydrant had rusted so badly that it could no longer be used.

The hydrant had to be dug up and replaced because it was too old and damaged to be repaired.

The water pressure in the hydrant was low, causing delays in putting out the fire.

The hydrant was painted bright red to make it easier to spot in case of an emergency.

When the water main broke, the hydrant was the only source of water for the residents.

The firefighters connected the hose to the nearest hydrant to extinguish the fire.

The fire department organized a training session for the volunteers on how to use a hydrant.

The hydrant was blocked by a parked car, making it difficult for the firefighters to access it.

The firefighters used a wrench to open the hydrant valve and release the water.

The driver accidentally hit the hydrant and caused water to spray everywhere.

The city workers painted the fire hydrant bright red so it would be easy to find in an emergency.

The valve on the hydrant was replaced with a new one made of stainless steel.

The valve on the hydrant was turned off to prevent water waste during a drought.

The valve on the hydrant was shut off to repair a broken water main.

The fire department connected their hose to the fire hydrant.

The firefighter quickly turned on the hydrant to put out the flames.

The hydrant is equipped with a valve that controls the water flow.

The firefighters had to dig out the hydrant from the snow after the winter storm.

I saw a dog drinking water from the hydrant on the street.